Front end: ALL

Suspension related stuff goes in here.
User avatar
geospider
Patron 2020
Patron 2020
Posts: 581
Joined: Mon Mar 20, 2017 9:07 pm
Your car is a: 1979 Spider 2000
Location: concord, ca

Front end: ALL

Postby geospider » Thu Jun 22, 2017 11:21 pm

To those with more knowledge than me:

replacing:
ball joints, front bushings, springs, shocks
centerlink, tie rods.
wheel bearings

any good order or just pull it all apart

Geo

User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Front end: ALL

Postby RRoller123 » Fri Jun 23, 2017 3:37 am

Most agree that it is the easiest and most cost effective approach in a total front end rebuild to buy 4 new control arms with the ball joints already installed.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle

fiat218
Posts: 5745
Joined: Fri May 16, 2008 5:06 pm
Your car is a: 1969 124 AS spider

Re: Front end: ALL

Postby fiat218 » Fri Jun 23, 2017 5:41 am

And just where do you find the control arms, non to be found,unless finally some one got a shipment
Jim
East Grand Forks MN
1970 Fiat Spider BS1 ( FOR SALE
1969 124 AS Spider
2017 Abrath
2018 Alfa Romeo 4c Spider

User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Front end: ALL

Postby RRoller123 » Fri Jun 23, 2017 6:35 am

They regularly come in to the various vendors, are you saying that they are all out at the moment?
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle

klweimer
Posts: 550
Joined: Tue Mar 27, 2012 7:45 am
Your car is a: 1982 Spider 2000
Location: Arvada, Colorado

Re: Front end: ALL

Postby klweimer » Fri Jun 23, 2017 8:25 am

Back to geospider's original question, I just pulled it all out and put it back in in reverse order. I don't think there are any tricks concerning sequence. While you have it all out, be sure to check the engine cross member for cracks and the shock towers for rust. Check crossmember bolts for tightness. You should also check steering box for play and the condition of the steering idler. Don't forget sway bar bushings. I bought a good quality 1/2" drive, electric impact wrench and set of impact sockets from Harbor Freight. Great for suspension work.
Kirk

User avatar
lglade
Patron 2018
Patron 2018
Posts: 327
Joined: Sat Dec 07, 2013 7:05 am
Your car is a: 1984 Pininfarina
Location: Mukilteo, WA

Re: Front end: ALL

Postby lglade » Fri Jun 23, 2017 9:08 am

Be sure to give your steering gear a good once over (fresh fluid and adjustment) when you have everything apart. Same goes for the steering idler on the passenger side. Everything has to be in good order to achieve a good outcome.
Lloyd Glade- Mukilteo, WA
1984 Pininfarina Spider Azzurra
1962 Fiat 500D - wife's car
2015 Subaru Outback
2017 Ford Focus RS

User avatar
geospider
Patron 2020
Patron 2020
Posts: 581
Joined: Mon Mar 20, 2017 9:07 pm
Your car is a: 1979 Spider 2000
Location: concord, ca

Re: Front end: ALL

Postby geospider » Fri Jun 23, 2017 12:15 pm

thanks for all the replies.
was planning the whole A arm replacement, but as mentioned can't find the ones that fit well.
so now more self education with replacing the bushings, etc.
Rust, strut towers: I am lucky, Ca car: no rust. although smog was a PITA.

geo

85redpini
Patron 2018
Patron 2018
Posts: 83
Joined: Sat Nov 03, 2012 12:51 pm
Your car is a: 1985 pininfarina spider

control arms

Postby 85redpini » Sat Jun 24, 2017 9:13 pm

fiat218 wrote:And just where do you find the control arms, non to be found,unless finally some one got a shipment

the company who made the arms seems no to want to anymore

the only new set in the USA are at
http://www.spiderroadster.com/124suspension1.htm


Return to “Suspension Related”

Who is online

Users browsing this forum: No registered users and 17 guests