rust

Keeping it sharp - paint, wax, detailing, etc.
KWL82
Patron 2018
Patron 2018
Posts: 48
Joined: Mon Sep 19, 2016 9:48 am
Your car is a: 1982 spider

rust

Postby KWL82 » Fri Sep 29, 2017 12:30 pm

removed rubber pads on underside of hood as it looks like was holding water and rusting. I've sanded the metal but wondering about best solution. POR15 over it then rattle can similar color? its the underside of hood and doesnt need to be concourse. Just want it looking good but mostly to stop from getting worse. also, maybe use the POR15 patch kit first? thanks in advance
Image
Image
Image
Image

DRUMMOND
Patron 2018
Patron 2018
Posts: 443
Joined: Thu Oct 20, 2011 11:11 pm
Your car is a: Fiat Spyder 2000 1980 Pininfarina

Re: rust

Postby DRUMMOND » Tue Oct 03, 2017 11:55 pm

Hi KWL82
The only way to stop it is to cut it all out, unless you can somehow get the rust converter onto the inside of the metal. Putting POR on the outside will only slow the rust down and it will reappear 6 months from now if not earlier.
If you cant weld still cut out to good metal and then use fiberglass/Filler, Then paint

Have fun ! :D

DuganNukem
Posts: 12
Joined: Mon Sep 18, 2017 6:22 am
Your car is a: 1972 124 Sport Spider

Re: rust

Postby DuganNukem » Wed Oct 04, 2017 1:06 am

Had anyone tried VHT rust converter? It was rated the #1 rust converter for 2017. I bought 6 spray cans of it for smaller areas I can't reach and I'm going to buy a gallon(if available) for my floor pan. I have a lot of rust on my 72' spider and was hoping to stop it with this stuff. Anyone used it?
Cheers!

DuganNukem
1972 Fiat 124 Sport Spider
2007 Audi RS4
2012 Volkswagen GLI


Return to “Cosmetics”

Who is online

Users browsing this forum: No registered users and 30 guests