Turtleback PCV Hose

Keep it on topic, it will make it easier to find what you need.
grrrdot
Posts: 224
Joined: Mon Jan 02, 2012 11:14 pm
Your car is a: 1967 124

Turtleback PCV Hose

Postby grrrdot » Sat Jan 06, 2018 10:52 pm

Hi,
I’m trying to get everything together to put a set of IDFs on my 1608. I have the waffle manifold and turtleback air cleaner.
Anyone know which crankcase vent hose works with this setup?
Thanks,
-G

mamsterla
Posts: 69
Joined: Sun Nov 26, 2017 10:10 pm
Your car is a: 1969 Fiat 124 Spider AS

Re: Turtleback PCV Hose

Postby mamsterla » Sat Jan 06, 2018 11:12 pm

I think I just have some 3/8 hose for my 1438 with that manifold, but I can check in the morning if you want.
1969 Fiat 124 Spider AS0012768

grrrdot
Posts: 224
Joined: Mon Jan 02, 2012 11:14 pm
Your car is a: 1967 124

Re: Turtleback PCV Hose

Postby grrrdot » Sun Jan 07, 2018 8:19 am

Sorry, I actually mean the breather hose. The one that goes from the oil separator on the block to under the turtleback.
I think that's bigger than 3/8 right?

Is the typical carb'd Fiat crankcase vent hose long enough to work?

-G

User avatar
seabeelt
Patron 2019
Patron 2019
Posts: 1612
Joined: Tue Feb 19, 2008 4:22 pm
Your car is a: Fiat Spider - 1971 BS1
Location: Tiverton, RI

Re: Turtleback PCV Hose

Postby seabeelt » Thu Jul 05, 2018 1:15 pm

It should be long enough
Michael and Deborah Williamson
1971 Spider -Tropie’ - w screaming IDFs
1971 Spider - Vesper -scrapped
1979 Spider - Seraphina - our son's car now sold
1972 Spider - Tortellini- our son's current

User avatar
kmead
Posts: 1069
Joined: Sat Aug 02, 2008 9:24 pm
Your car is a: 1969 850 SC 1970 124 SC 85 X19
Location: Grand Rapids, MI

Re: Turtleback PCV Hose

Postby kmead » Mon Jul 16, 2018 7:19 am

Yes its either 17 or 19mm ID, so 5/8 or 3/4 fuel grade hose, not coolant hose.
Karl

1969 Fiat 850 Sports Coupe
1970 Fiat 124 Sports Coupe
1985 Bertone X1/9

grrrdot
Posts: 224
Joined: Mon Jan 02, 2012 11:14 pm
Your car is a: 1967 124

Re: Turtleback PCV Hose

Postby grrrdot » Fri Jul 20, 2018 9:53 am

I ended up using the same hose that fit the single carb setup and it works great!


Return to “Engine and Tuning”

Who is online

Users browsing this forum: 17alloveragain and 17 guests