It's nice to finally get Sophia out of the garage, and show off my first prototype vent hole cover. It was a bit of a challenge getting the shape right, and I think I'm pretty close to a perfect fit. (designed to click into place, no tools reqr'd)
3D Printed Vent Hole Covers
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
3D Printed Vent Hole Covers
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Posts: 3790
- Joined: Fri Mar 15, 2019 11:23 pm
- Your car is a: 1969 and 1971 124 spiders
- Location: San Francisco Bay Area
Re: 3D Printed Vent Hole Covers
Brian, those look awesome! I wonder if the various Fiat vendors would be interested, if you could produce these in large quantities?
-Bryan
-Bryan
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
Re: 3D Printed Vent Hole Covers
18Fiatsandcounting wrote:Brian, those look awesome! I wonder if the various Fiat vendors would be interested, if you could produce these in large quantities?
-Bryan
I could probably crank out a pair every 4 hours or so. What's on the car now is printed in PLA, so it isn't very durable. Not sure if the final product will be printed in PETG or ABS, but I still have some small tweaks and adjustments to make.
If there's enough interest I might make a run of 10 or so sets, and sell some before I make the model available on Thingiverse.
-Brian
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Patron 2019
- Posts: 220
- Joined: Fri Aug 11, 2017 1:57 pm
- Your car is a: 1978 124 Spider
Re: 3D Printed Vent Hole Covers
That looks really great. Once you finalize the design and have an idea what you might sell them for, I’d be interested. I’d also be very interested if they could be printed more like a turn signal look. I also happen to live a few miles from AutoRicambi and Vicks and could swing by and show them a pair installed. Email me when you’re ready to produce a few. Derekdbender@gmail.com
- dinghyguy
- Patron 2018
- Posts: 457
- Joined: Thu Jul 20, 2017 7:41 pm
- Your car is a: 1981 spider
- Location: Vancouver, Canada
Re: 3D Printed Vent Hole Covers
Those do look great, i wonder if they could be modified to insert a specific set of turn signals into the plastic, i dont know if the ones in the bumper could be reused, but i am sure a set of some size might work. Basically you would be building and adapter flange. Just a thought for those who might want their lights closer to the corners.
but great work
dinghyguy
but great work
dinghyguy
1981 Red Spider "Redbob"
1972 blue Volvo 1800ES "Bob"
1998 Red Ford Ranger
1972 blue Volvo 1800ES "Bob"
1998 Red Ford Ranger
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
Re: 3D Printed Vent Hole Covers
I was thinking $60 would be undervaluing, but anything over $80 would put people off since shipping from Canada is so expensive. I have to get around to finishing my printer enclosure so I can print ABS (it gives off a bad smell and hazardous VOCs when printing), that will determine the amount of time/material each set will require.TheBender wrote:That looks really great. Once you finalize the design and have an idea what you might sell them for, I’d be interested. I’d also be very interested if they could be printed more like a turn signal look. I also happen to live a few miles from AutoRicambi and Vicks and could swing by and show them a pair installed. Email me when you’re ready to produce a few. Derekdbender@gmail.com
The cover was designed so I could switch out the middle for turn signals, or fog/running lights.
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
Re: 3D Printed Vent Hole Covers
The original bumper signals are a bit large, but there are lights out there that might work better.dinghyguy wrote:Those do look great, i wonder if they could be modified to insert a specific set of turn signals into the plastic, i dont know if the ones in the bumper could be reused, but i am sure a set of some size might work. Basically you would be building and adapter flange. Just a thought for those who might want their lights closer to the corners.
but great work
dinghyguy
Once I've perfected the fit, I'll be designing a different centre, to replace the louvers. I just got to shop around for a suitable generic front signal light.
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Patron 2019
- Posts: 220
- Joined: Fri Aug 11, 2017 1:57 pm
- Your car is a: 1978 124 Spider
Re: 3D Printed Vent Hole Covers
[/quote]
The original bumper signals are a bit large, but there are lights out there that might work better.
Once I've perfected the fit, I'll be designing a different centre, to replace the louvers. I just got to shop around for a suitable generic front signal light.[/quote]
I used some small LED that work well and put them inside a signal housing. Maybe they will spark an idea or two.
The original bumper signals are a bit large, but there are lights out there that might work better.
Once I've perfected the fit, I'll be designing a different centre, to replace the louvers. I just got to shop around for a suitable generic front signal light.[/quote]
I used some small LED that work well and put them inside a signal housing. Maybe they will spark an idea or two.
-
- Posts: 18
- Joined: Tue Aug 08, 2023 8:08 pm
- Your car is a: 1979 Fiat Spider 2000
Re: 3D Printed Vent Hole Covers
are you possibly able to still make these?
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
Re: 3D Printed Vent Hole Covers
Sent you a PM.
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
Re: 3D Printed Vent Hole Covers
Sent you a PM.
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Posts: 113
- Joined: Thu Oct 04, 2007 6:22 pm
- Your car is a: 1979 Spider 2000
- Location: Cole Harbour, Nova Scotia, Canada
- Contact:
Re: 3D Printed Vent Hole Covers
Brian G. Butler
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
Colby Village
Nova Scotia, Canada
'79 Fiat 2000
-
- Posts: 1
- Joined: Tue Dec 31, 2019 6:04 pm
- Your car is a: 1982 Fiat 124 Spider
Re: 3D Printed Vent Hole Covers
I've got a Bambu P1S and would like to print these for my 82 if you would be able to share the STL?