Fiberglass Dash

So Cal Mark · Post by **So Cal Mark** » Sat Sep 24, 2011 12:16 am

I now have our fiberglass replacement dashes! This is not a cap, but a complete replacement dash. The surface has a grain finish to simulate vinyl. The pics show the dash with a wood kit. The wood kit is not included, but merely in the pics to show how well the fit is. This mold was made from a brand new dash, so the dimensions are perfect. This will cure the warpage, splitting problems of the original dashes. The surface can be painted or left in the black gel coat, or covered in vinyl.

azruss · Post by **azruss** » Sat Sep 24, 2011 1:12 am

dash came out nice. how about some pix of the back side and bolt points. I made a fiberglass targa top many years ago. the interior still looks like new and looks and feels like vinyl. the exterior has taken a beating from sun and weather exposure. worthwhile to keep the dash covered from sun when stored. a good uv protection is worth doing from the get-go.

azygoustoyou · Post by **azygoustoyou** » Sat Sep 24, 2011 9:13 am

Nice item Mark!

Daniel · Post by **Daniel** » Wed Sep 28, 2011 5:26 am

It looks just like an original Dash !

grittracing · Post by **grittracing** » Wed Sep 28, 2011 10:25 am

Very nice Mark if and when mine splits i know where I am going to get my next dash? what is the cost ?

rlux4 · Post by **rlux4** » Sat Oct 01, 2011 8:31 am

When I see the dash covers they have two listed, something to do with the difference at the steering column section. Does this dash fit all years?
Ron

So Cal Mark · Post by **So Cal Mark** » Sat Oct 01, 2011 9:53 am

the dash will fit all years, but it uses the wood with the straight bottom. If you're using a cap, there are two different caps since the dashes were different. The dashes will interchange though, it just requires the proper cluster wood. This isn't a cap, it's a replacement dash

Daniel · Post by **Daniel** » Sun Oct 02, 2011 3:13 am

This Dash is a great ideal something that will last forever or almost that long and it looks factory .

txSteve · Post by **txSteve** » Tue Nov 15, 2011 4:53 pm

Mark, do you still sell these consoles? I do not see them listed on your site, just the custom "Ferrari GT" one. Did not look like that one would fit with the style of dash in my 1984:

So Cal Mark · Post by **So Cal Mark** » Tue Nov 15, 2011 9:27 pm

the 84 stuff is different and I don't know of anyone making those parts

fiat218 · Post by **fiat218** » Sat Nov 19, 2011 6:13 am

just a quick question
i got the fiberglass lower console from mark and im wondering about when u paint theses, u just sand for a nice finish and primer and paint? am i correct

124JOE · Post by **124JOE** » Sun Nov 20, 2011 6:00 pm

no dont sand it at all
wipe it clean and spray

Fiberglass Dash

Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash

Re: Fiberglass Dash